Đang thực hiện
ATLAS COPCOSPARE PART

Desiccant HRE

Manufacturer :

Product code :

Status : Out of stock

Price: Call

Product Information
Specifications
Related Products(4)
Aftercoolers are heat exchangers for cooling the discharge from a air compressor. They use either air or water and are an effective means of removing moisture from compressed air. Aftercoolers control the amount of water vapor in a compressed air system by condensing the water vapor into liquid form. In a distribution or process manufacturing system, liquid water can cause significant damage to the equipment that uses compressed air. An aftercooler is necessary to ensure the proper functionality of pneumatic or air handling devices that are a part of process manufacturing systems. Aftercoolers can use either air-cooled or water-cooled mechanisms.
After cooler
Status : Out of stock
The FLEX series are optimized air dryers for hot and humid climate in the tropical regions. An advanced stainless steel brazed plate heat exchanger is applied, and it deters refrigeration load with great efficiency of heat-transfer. The innovative and simplified refrigeration circuit provides reliable operation, low operating cost and versatile installation.
Air dryer FLEX
Status : Out of stock
The PSK Series Aborption Air Dryers is the newest generation of heatless desiccant compressed air dryers, which are designed and built with confidence to offer the highest reliability in the industry.  The key to reliability of the PSK Series dryer is the proprietary air flow switching valve. Based on its superior design and proven performance this shuttle valve is covered by a lifetime replacement warranty. Minus 40ºC dewpoint performance Minus 73ºC is optional Wide variety of instrumentation options ASME vessel code option Compu-Purge Dewpoint control option saves air wastage Proven design history How It Works 1. Oil, liquid and water particles are removed from inlet air by a pre-filter & filtered air passes through the lower shuttle vale into the on-stream vessel. 2. The wet air flows upward through the desiccant bed, which becomes dry air. Dry air @ -40ºC PDP (standard) or –73.3ºC PDP (optional) exists through upper shuttle valve and splits into process air & low flow purge air. 3. Purge air flows into top of regenerating vessel and dry purge air flows downward through vessel removing moisture from saturated vessel. 4. Wet purge air exists vessel through lower purge valve into exhaust muffler & to atmosphere as a vapour
Desiccant PSK
Status : Out of stock
Features Minimum purge air ussage - saving the heat of adsorption maximises the moisture holding capacity of the purged air, minimising the amount required. Long desiccant life - beds size tto prevent fluidization plus slow and complete regeneration prevent desiccant movement and deterioration. Heavy duty purge exhaust muffler for quiet opperation. Non-lubricated, soft seated control valves. Stainless steel support screens and air diffusers-filters out gross contaminents, protects valves. Furnished in cabinet for easy wall mounting completely assembled, pipe, and wired shipped with full charge of desiccant only hook-up of utilities is needed to opperate. Vessels are constructed to meet the requirements of ASME code, section viii, devision 1 and stamped (optional, 55SCFM larger)  How It Works Compressed air enters the drier and is directed to left vessel by valve and then to the drier outlet through shuttle valve. A portion of the dried air is throttled to near atmospheric pressure by means of orifice. The extremely dry, low pressure air flows through and regenerates the desiccant in right vessel and is exhausted through purge/repressurization valve and exhaust muffler to atmosphere. After a set time, the automatic solid state timer closes purge/repressurization valve allowing right vessel to repressurize slowly. At the end of 3 minutes (when operating on a 6 minute cycle). Valve shifts and purge/repressurization valve re-opens. The main airflow is now dried by right vessel while left vessel is being regenerated.
Desiccant HLK
Status : Out of stock
Online Support
Business Divisions
Phone
Technical Department
Phone
Featured Products
Statistics
Access Statistics
44453View all
3People watching
© PNA Vina Co. Ltd 2009-2019
Web design by Web123.vn